<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Preformed Substructures</title>
	<atom:link href="https://preformedsubstructures.co.uk/feed/" rel="self" type="application/rss+xml" />
	<link>https://preformedsubstructures.co.uk/</link>
	<description>Screw Pile Installation Specialists</description>
	<lastBuildDate>Thu, 12 Nov 2026 13:50:26 +0000</lastBuildDate>
	<language>en-GB</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.5</generator>
	<item>
		<title>Screw Pile Foundations on Made Ground: What Contractors Need to Know</title>
		<link>https://preformedsubstructures.co.uk/screw-pile-foundations-made-ground/</link>
		
		<dc:creator><![CDATA[Chris Ward]]></dc:creator>
		<pubDate>Thu, 12 Nov 2026 12:55:42 +0000</pubDate>
				<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://preformedsubstructures.co.uk/?p=4184</guid>

					<description><![CDATA[<p>The trial pit looked promising for the first half metre, then the bucket came up full of brick, clinker and the remains of a Victorian floor slab. By two metres there was still no natural ground, the spoil heap had become a waste classification problem, and the strip foundation priced at tender was no longer</p>
<p>The post <a href="https://preformedsubstructures.co.uk/screw-pile-foundations-made-ground/">Screw Pile Foundations on Made Ground: What Contractors Need to Know</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>The trial pit looked promising for the first half metre, then the bucket came up full of brick, clinker and the remains of a Victorian floor slab. By two metres there was still no natural ground, the spoil heap had become a waste classification problem, and the strip foundation priced at tender was no longer realistic.</p>
<p>Most contractors on infill and brownfield sites will recognise that morning. This guide covers what made ground is, why it undermines shallow foundations, how the options compare, and why <a href="https://preformedsubstructures.co.uk/">screw pile foundations</a> are often the most practical way through it.</p>
<h2>What Is Made Ground?</h2>
<p>Made ground is material deposited by human activity rather than natural geological processes, as the BRE&#8217;s guidance on <a href="https://www.designingbuildings.co.uk/wiki/Building_on_fill">building on fill</a> defines it. It is usually placed in layers at different times with different compaction, so a borehole at one corner of a plot can find well-compacted hardcore while a trial pit ten metres away hits soft backfill over a buried cellar.</p>
<p>&nbsp;</p>
<table width="624">
<thead>
<tr>
<td width="156">Made ground type</td>
<td width="156">Main engineering risk</td>
<td width="156">Effect on screw pile installation</td>
<td width="156">What to check in the GI</td>
</tr>
</thead>
<tbody>
<tr>
<td width="156">Demolition rubble and brick fill</td>
<td width="156">Voids, uneven density, buried obstructions</td>
<td width="156">Helix may refuse on brick or concrete; usually penetrable once cleared or pre-augered</td>
<td width="156">Obstruction depth and extent</td>
</tr>
<tr>
<td width="156">Ash, clinker and slag</td>
<td width="156">Chemical attack on steel and concrete</td>
<td width="156">Penetrable, but corrosion allowance becomes a design issue</td>
<td width="156">Sulphate, pH and chloride testing</td>
</tr>
<tr>
<td width="156">Clay or soil backfill</td>
<td width="156">Ongoing consolidation, downdrag on piles</td>
<td width="156">Easy to install through; the fill adds load to the pile rather than carrying it</td>
<td width="156">Undrained shear strength, age of fill</td>
</tr>
<tr>
<td width="156">Domestic or mixed waste</td>
<td width="156">Settlement as organics decompose, landfill gas</td>
<td width="156">Penetrable but unpredictable; gas and contamination controls needed</td>
<td width="156">Gas monitoring, organic content</td>
</tr>
<tr>
<td width="156">Relic foundations and slabs</td>
<td width="156">Hard spots beside soft spots</td>
<td width="156">Piles relocated around them or cored through</td>
<td width="156">Historical mapping, trial pits at pile positions</td>
</tr>
</tbody>
</table>
<h2></h2>
<h2>Why Strip and Raft Foundations Struggle</h2>
<p>The strip foundation guidance in <a href="https://assets.publishing.service.gov.uk/media/5a80437640f0b623026927b2/BR_PDF_AD_A_2013.pdf">Approved Document A</a> (Section 2E) only applies where there is no non-engineered fill or wide variation in ground conditions under the loaded area. Once made ground is present, the foundation needs engineering design, which usually means digging down to natural ground or choosing another system.</p>
<p>The reasons are mostly about movement: fill of mixed density settles unevenly, it keeps compressing under its own weight for years, organic material loses volume as it decomposes, and the <a href="https://nhbc-standards.co.uk/2024/4-foundations/4-6-engineered-fill/4-6-5-suitability-of-ground-conditions/">NHBC Standards</a> warn that rising groundwater can trigger sudden inundation settlement. A raft spreads the load but still moves with the fill, and <a href="https://speedeck.uk/news/all-articles/foundations-for-made-ground/">Speedeck</a> suggests trench fill usually becomes uneconomic once fill is deeper than about 1.5 to 2 metres.</p>
<h3>The hidden cost: muck-away</h3>
<p>Excavated made ground often can&#8217;t be disposed of as clean inert spoil. Take a 20-metre run of trench fill, 0.6 metres wide and 2.5 metres deep: that is around 30 m³, or roughly 54 tonnes at an assumed 1.8 t/m³. At <a href="https://www.gov.uk/government/publications/landfill-tax-rates-for-2026-to-2027/landfill-tax-increase-in-rates-from-1-april-2026">HMRC&#8217;s landfill tax rates</a> from April 2026, classification makes a large difference before haulage and gate fees are even added.</p>
<table width="624">
<thead>
<tr>
<td width="208">Spoil classification</td>
<td width="208">Landfill tax per tonne</td>
<td width="208">Tax on 54 tonnes</td>
</tr>
</thead>
<tbody>
<tr>
<td width="208">Qualifying inert material (lower rate)</td>
<td width="208">£8.65</td>
<td width="208">approx. £470</td>
</tr>
<tr>
<td width="208">Non-qualifying material (standard rate)</td>
<td width="208">£130.75</td>
<td width="208">approx. £7,060</td>
</tr>
</tbody>
</table>
<p><em>On a 20-metre extension footing, the classification of the spoil alone can swing landfill tax from under £500 to over £7,000.</em></p>
<p>&nbsp;</p>
<h2>Foundation Options on Made Ground Compared</h2>
<p>The right choice depends on the depth and content of the fill, so treat this as general practice rather than a design recommendation.</p>
<table width="624">
<thead>
<tr>
<td width="156">Option</td>
<td width="156">Works best</td>
<td width="156">Struggles on made ground</td>
<td width="156">Spoil</td>
</tr>
</thead>
<tbody>
<tr>
<td width="156">Deepened strip or trench fill</td>
<td width="156">Fill under roughly 1.5 to 2 m over good natural ground</td>
<td width="156">Deep or variable fill, groundwater</td>
<td width="156">High</td>
</tr>
<tr>
<td width="156">Raft</td>
<td width="156">Light structures on fairly uniform fill</td>
<td width="156">Variable or decomposing fill</td>
<td width="156">Moderate</td>
</tr>
<tr>
<td width="156">Vibro stone columns</td>
<td width="156">Granular fills within NHBC limits</td>
<td width="156">Organic, very soft or landfill material; <a href="https://nhbc-standards.co.uk/2024/4-foundations/4-5-vibratory-ground-improvement-techniques/4-5-5-suitability-of-ground-conditions/">NHBC Chapter 4.5</a> also flags gas pathways</td>
<td width="156">Low</td>
</tr>
<tr>
<td width="156">Mini piles</td>
<td width="156">Deep fill, heavier loads</td>
<td width="156">Bored piles create contaminated arisings; driven piles bring vibration</td>
<td width="156">Moderate to low</td>
</tr>
<tr>
<td width="156">Screw piles with ground beams</td>
<td width="156">Fill over competent strata within reach, light to medium loads, tight sites</td>
<td width="156">Dense obstructions at pile positions</td>
<td width="156">Very low</td>
</tr>
</tbody>
</table>
<p>Screw piles are strongest where the fill is the problem but the ground beneath it is reasonable; where every pile position meets concrete, or competent ground is very deep, other piling methods may suit better. Our <a href="https://preformedsubstructures.co.uk/screw-piles-vs-mini-piles-vs-concrete-foundations/">comparison of screw piles, mini piles and concrete foundations</a> and our guide to <a href="https://preformedsubstructures.co.uk/screw-pile-foundations-vs-concrete-foundations-cost/">screw pile costs compared with concrete</a> go into more detail.</p>
<p>&nbsp;</p>
<h2>How Screw Piles Get Through Made Ground</h2>
<p>A screw pile is a steel shaft with helical plates near its toe, rotated into the ground hydraulically. On made ground the fill is treated as something to pass through rather than found on: the pile is advanced until the helices sit in the natural stratum beneath, which then carries the load. Our guide to <a href="https://preformedsubstructures.co.uk/soil-bearing-capacity-foundation/">soil bearing capacity</a> explains how that layer is identified.</p>
<p>Installation torque rises as the helix enters stronger ground, so the installer gets a live check that each pile has reached competent material, although the torque-to-capacity relationship is empirical and should be confirmed by the designer. Extensions can be added on site if competent ground is deeper than expected, and because the pile displaces rather than excavates, there is very little spoil to classify.</p>
<p>A ground beam system then spans between the piles, so the building bridges over the fill, and since there is no curing period the substructure can often be finished in days. That is why the approach suits <a href="https://preformedsubstructures.co.uk/house-extensions-screw-piles/">house extensions</a> and <a href="https://preformedsubstructures.co.uk/restricted-access-foundations/">restricted access sites</a>.</p>
<p><img fetchpriority="high" decoding="async" class="alignnone wp-image-3506 size-large" src="https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1024x818.jpg" alt="large pile install" width="1024" height="818" srcset="https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-177x142.jpg 177w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-200x160.jpg 200w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-300x240.jpg 300w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-400x319.jpg 400w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-600x479.jpg 600w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-768x613.jpg 768w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-800x639.jpg 800w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1024x818.jpg 1024w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1200x958.jpg 1200w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1536x1226.jpg 1536w" sizes="(max-width: 1024px) 100vw, 1024px" /></p>
<p>&nbsp;</p>
<h2>What the Ground Investigation Needs to Establish</h2>
<p>The <a href="https://nhbc-standards.co.uk/2024/4-foundations/4-1-land-quality-managing-ground-conditions/4-1-10-guidance-for-investigations/">NHBC guidance for investigations</a> requires work to BS EN 1997-2, with testing by UKAS or MCERTS accredited laboratories. For piling through fill, these are the questions that shape the design.</p>
<table width="624">
<thead>
<tr>
<td width="208">Question</td>
<td width="208">Why it matters</td>
<td width="208">Typical method</td>
</tr>
</thead>
<tbody>
<tr>
<td width="208">How thick is the fill, and how much does it vary?</td>
<td width="208">Sets pile length across the site</td>
<td width="208">Window samples or boreholes at several positions</td>
</tr>
<tr>
<td width="208">What is the competent stratum, and how deep?</td>
<td width="208">The helices must bear in it</td>
<td width="208">Boreholes with in-situ testing</td>
</tr>
<tr>
<td width="208">Are there obstructions at pile positions?</td>
<td width="208">Can stop or deflect a pile</td>
<td width="208">Desk study, historical maps, trial pits</td>
</tr>
<tr>
<td width="208">Is the fill still settling?</td>
<td width="208">Settling fill drags piles down</td>
<td width="208">Fill age and type, strength testing</td>
</tr>
<tr>
<td width="208">How aggressive is the ground to steel?</td>
<td width="208">Sets corrosion allowance and coating</td>
<td width="208">pH, sulphate, chloride, resistivity</td>
</tr>
<tr>
<td width="208">Is gas or contamination present?</td>
<td width="208">Gas protection, safety, waste handling</td>
<td width="208">Gas monitoring wells, chemical testing</td>
</tr>
<tr>
<td width="208">Could groundwater rise?</td>
<td width="208">Can trigger inundation settlement</td>
<td width="208">Monitoring wells over several visits</td>
</tr>
</tbody>
</table>
<p>One borehole is rarely enough on fill. On a tight budget, a few window samples across the pile grid plus one borehole proving the competent stratum usually tell the designer more than a single deep hole in a corner.</p>
<p>&nbsp;</p>
<h2>How Pile Design Changes on Made Ground</h2>
<p>Designers will normally ignore any support from the fill, which often means longer piles than on a greenfield plot. Where the fill is still consolidating, it grips the shaft and pulls it down, and <a href="https://structville.com/2020/10/negative-skin-friction-in-piles.html">Structville&#8217;s explanation of negative skin friction</a> shows how that drag is added to the working load rather than counted as support.</p>
<p>The chemical test results drive the coating and any sacrificial steel thickness, and obstructions are best handled with a probing or pre-augering stage plus a ground beam layout that tolerates a pile moving slightly.</p>
<p>Where gas is present, the substructure needs gas protection and the installation shouldn&#8217;t open new pathways between layers. Torque records for every pile, checked against the design target, give a site-wide record of performance, with a preliminary load test on larger schemes.</p>
<p>&nbsp;</p>
<h2>Need Assistance Building on Made Ground?</h2>
<p>The contractors who handle made ground well treat it as a known risk from the start: they investigate across the whole footprint and choose foundations that bypass the fill rather than rely on it. Screw piles won&#8217;t suit every brownfield plot, but where competent ground sits within reach they can cut spoil, shorten the programme and give a torque record for every pile.</p>
<p>Preformed Substructures installs screw pile foundations <strong>across South East England</strong>, including <a href="https://preformedsubstructures.co.uk/london-screw-pile-contractor/">London</a>, <a href="https://preformedsubstructures.co.uk/kent-screw-pile-contractors/">Kent</a> and <a href="https://preformedsubstructures.co.uk/surrey-screw-pile-contractor/">Surrey</a>, and our <a href="https://preformedsubstructures.co.uk/projects/">recent projects</a> show the approach in practice. If you&#8217;re pricing a scheme on made ground, <a href="https://preformedsubstructures.co.uk/contact-us/">send us the ground investigation and drawings</a> and we&#8217;ll advise whether screw piles are suitable.</p>
<p>The post <a href="https://preformedsubstructures.co.uk/screw-pile-foundations-made-ground/">Screw Pile Foundations on Made Ground: What Contractors Need to Know</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>What Is Soil Bearing Capacity And How Does It Affect Foundation Choice?</title>
		<link>https://preformedsubstructures.co.uk/soil-bearing-capacity-foundation/</link>
		
		<dc:creator><![CDATA[Chris Ward]]></dc:creator>
		<pubDate>Fri, 25 Sep 2026 12:42:31 +0000</pubDate>
				<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://preformedsubstructures.co.uk/?p=4105</guid>

					<description><![CDATA[<p>One term that’s often used in all ground investigation reports, but never really explained clearly, is soil bearing capacity. Although it may sound technical, it means different soils can support very different loads. So, soil bearing capacity is a major consideration when deciding which type of foundation suits a building. In this guide, we’ll unpack</p>
<p>The post <a href="https://preformedsubstructures.co.uk/soil-bearing-capacity-foundation/">What Is Soil Bearing Capacity And How Does It Affect Foundation Choice?</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>One term that’s often used in all ground investigation reports, but never really explained clearly, is soil bearing capacity. Although it may sound technical, it means <strong>different soils can support very different loads.</strong> So, soil bearing capacity is a major consideration when deciding which type of foundation suits a building.</p>
<p>In this guide, we’ll unpack what soil bearing capacity really means and how it can affect the choice of foundation, how it’s measured on-site, the most commonly found soil types in and around the South East, and how screw pile underpinning can give you a solid foundation even on poor near-surface soil.</p>
<h2>What is soil bearing capacity?</h2>
<p>Soil bearing capacity describes how much pressure soil can withstand without shear failure (collapsing) or excessive settlement (sinking). The key factors in this are soil type, density, and its shear strength.</p>
<p>For something so important, the term soil bearing capacity is rarely fully explained and is often used as a catch-all phrase in reports. But inside the construction industry, structural engineers actually use three specific variations for ground investigation reports based on safety and soil movement:</p>
<h3>Ultimate bearing capacity</h3>
<p>This variation is the maximum pressure the soil can safely take before shear failure, which can cause collapse and foundations to slip out from under the building.</p>
<h3>Net bearing capacity</h3>
<p>This refers to the pressure the soil can support from the foundation after allowing for the weight of the soil already at foundation level. Engineers apply a factor of safety (between 2 and 3) to provide a safe margin.</p>
<h3>Allowable bearing capacity</h3>
<p>This is the bearing pressure considered safe for the foundation. Again, engineers apply a factor of safety (between 2 and 3) before adjusting it to make sure the building doesn’t settle or sink too much.</p>
<p>By applying a level of bearing capacity, engineers can specify what type of building foundation is needed, how deep it should be, and which building techniques best suit the site. Bearing capacities can vary depending on how deep the foundations are – the deeper the foundation, the higher the bearing capacity.</p>
<p><img decoding="async" class="alignnone wp-image-1514 size-large" src="https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-1-1024x768.jpg" alt="screwpiling" width="1024" height="768" srcset="https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-1-200x150.jpg 200w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-1-300x225.jpg 300w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-1-400x300.jpg 400w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-1-600x450.jpg 600w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-1-768x576.jpg 768w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-1-800x600.jpg 800w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-1-1024x768.jpg 1024w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-1-1200x900.jpg 1200w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-1-1536x1152.jpg 1536w" sizes="(max-width: 1024px) 100vw, 1024px" /></p>
<h2></h2>
<h2>What affects the soil bearing capacity?</h2>
<p>The specific variation of soil bearing capacity used can be affected by different physical and environmental factors. These factors differ from site to site, but can include:</p>
<h3>Soil type</h3>
<p>Different soil types don’t behave in the same way, so rock or dense gravel can deliver a high bearing capacity, while silt, sand, or clay have lower capacity.</p>
<h3>Moisture content</h3>
<p>Excess water will weaken soil, making it unstable and reducing its bearing capacity. Clay soil also holds moisture, so it expands, affecting how much pressure it can support.</p>
<h3>Foundation shape and depth</h3>
<p>A deeper foundation gives a higher bearing capacity because the surrounding soil is more compacted. A wider foundation footing can also help spread the load.</p>
<h3>Topography</h3>
<p>The flatter the land, the more stable the build. Projects built on sloping land can increase the risk of lateral sliding or movement.</p>
<h2>How is soil bearing capacity measured?</h2>
<p>A detailed assessment of soil bearing capacity can help keep a building stable and safe for decades. Measured in kilonewtons per square metre (kN/m²), bearing capacity is assessed using different methods depending on the project. Structural and civil engineers, architects, and specifiers follow the guidance in <strong>BS 8004 – Code of practice for foundations</strong> (BS 8004:2015+A1:2020), published by the<a href="https://knowledge.bsigroup.com/"> British Standards Institution</a> (BSI).</p>
<p>For smaller or domestic builds and extensions with standard strip foundations, measurements are based on readily available presumptive values. However, further tests may be needed, including a trial pit or plate load test to measure how the soil reacts to weight.</p>
<p>For larger or more commercial projects, engineers use more site-specific methods to measure bearing capacity. These include Standard Penetration Testing (SPT) during borehole drilling or Cone Penetration Testing (CPT) to measure the strength and consistency of different soil layers.</p>
<p>Capacity measurements must be verified through further on-site investigations, but all soil samples can also be lab-tested for strength, density, moisture content, and other characteristics. The results ensure construction decisions are based on accurate data from the site itself.</p>
<h2>What are typical soil values for the South East?</h2>
<p>Soil types across the UK differ greatly from region to region. In the South East, where Preformed Substructures carries out most of its <a href="https://preformedsubstructures.co.uk/">screw pile foundations</a> work, soil types usually fall into four main categories, each with a range of <a href="https://squote.app/knowledge/landscaping/soil-classification">typical bearing capacities</a> benchmarked by BS 8004.</p>
<h3>Heavy clay soil</h3>
<p>This soil type, also known as London Clay, covers much of the South East. The typical bearing capacity ranges from 75-150 kN/m² for firm clay to 150-300 kN/m² for stiff clay. However, moisture can affect its capacity.</p>
<h3>Chalk and lime-rich soil</h3>
<p>White limestone rock (chalk) is found across much of the South of England and has a high bearing capacity of between 200-600 kN/m². But it can contain cavities and voids, so uniform strength can’t be guaranteed and will need inspection and site-specific tests for soft spots.</p>
<h3>Gravel soil</h3>
<p>With visible particles, dense gravel soil can support 200-600 kN/m² and is generally a low-risk soil type and more straightforward to build on. It’s an exceptional founding material, especially when mixed with sand.</p>
<h3>Made ground</h3>
<p>With a bearing capacity of under 50 kN/m², made ground is made of mixed layers of rubble, topsoil, brick, or organic material and is unpredictable. Composition and depth can vary significantly across a single site, which is why trial pits (usually a minimum of three on a domestic plot) are commissioned before finalising a foundation design.</p>
<p><img decoding="async" class="alignnone wp-image-3500 size-large" src="https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/House-extension-clay-soil-1024x768.jpg" alt="house extension in clay soil" width="1024" height="768" srcset="https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/House-extension-clay-soil-200x150.jpg 200w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/House-extension-clay-soil-300x225.jpg 300w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/House-extension-clay-soil-400x300.jpg 400w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/House-extension-clay-soil-600x450.jpg 600w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/House-extension-clay-soil-768x576.jpg 768w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/House-extension-clay-soil-800x600.jpg 800w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/House-extension-clay-soil-1024x768.jpg 1024w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/House-extension-clay-soil-1200x900.jpg 1200w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/House-extension-clay-soil-1536x1152.jpg 1536w" sizes="(max-width: 1024px) 100vw, 1024px" /></p>
<h2></h2>
<h2>When should specialist piling be used for foundations?</h2>
<p>Where there’s made ground, very soft clay, or other poor ground with low bearing capacity, standard strip foundations can be impractical because they need to be progressively widened to spread the load safely. If this is the case, there are options to increase the bearing capacity, including:</p>
<ul>
<li>removing the poor ground and founding on stronger soil below</li>
<li>using a raft foundation where the weak layer is shallow and stable, and loads are relatively low</li>
<li>using piles to take loads through poor ground to a stronger load-bearing stratum</li>
</ul>
<p>This is where <a href="https://preformedsubstructures.co.uk/">screw piling</a> and <a href="https://preformedsubstructures.co.uk/screw-pile-underpinning/">underpinning</a> can <strong>stabilise failing foundations more effectivel</strong>y. Preformed Substructures’ GoliathTech helical pile and ground beam system transfers structural loads through weak or made ground to stronger soil or rock below, with bearing capacities of up to 300 kN per pile, depending on ground conditions.</p>
<p>The system can be installed through access as narrow as a single doorway and, because it requires minimal excavation, it’s well suited to sites where traditional foundations could damage protected tree roots.</p>
<h2>Could screw piling be right for your project?</h2>
<p>If poor ground or soil types make conventional foundations a non-starter, Preformed Substructures can help with a practical alternative. Our screw pile supply and install service transfers structural loads through weak near-surface soils to stronger ground below, with minimal excavation and disruption.</p>
<p><a href="https://preformedsubstructures.co.uk/contact-us/">Contact us</a> today to discuss your project and see whether screw piling can provide the foundation support you need.</p>
<p>The post <a href="https://preformedsubstructures.co.uk/soil-bearing-capacity-foundation/">What Is Soil Bearing Capacity And How Does It Affect Foundation Choice?</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>My Property Needs Underpinning: What Are the Options?</title>
		<link>https://preformedsubstructures.co.uk/underpinning-options/</link>
		
		<dc:creator><![CDATA[Chris Ward]]></dc:creator>
		<pubDate>Mon, 10 Aug 2026 08:03:27 +0000</pubDate>
				<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://preformedsubstructures.co.uk/?p=4039</guid>

					<description><![CDATA[<p>Few words in a surveyor's report land as heavily as "underpinning". It sounds expensive, disruptive and permanent, and the temptation is to start pricing up the fix straight away. UK subsidence-related insurance claims reached £153 million in the first half of 2025 alone, so it can be a devastating issue for homeowners. Before you compare</p>
<p>The post <a href="https://preformedsubstructures.co.uk/underpinning-options/">My Property Needs Underpinning: What Are the Options?</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>Few words in a surveyor&#8217;s report land as heavily as &#8220;underpinning&#8221;. It sounds expensive, disruptive and permanent, and the temptation is to start pricing up the fix straight away.</p>
<p><a href="https://www.bgs.ac.uk/news/latest-research-emphasises-climate-related-subsidence-risk-to-millions-of-british-homes/">UK subsidence-related insurance claims reached £153 million in the first half of 2025 alone</a>, so it can be a devastating issue for homeowners.</p>
<p>Before you compare methods, you need to know one thing: what is actually moving your house? Get that wrong and even the most expensive underpinning can fail, because you have treated the symptom and left the cause in the ground.</p>
<h2>First, confirm it really is subsidence</h2>
<p>Not every crack means subsidence. New builds settle for a year or two. Plaster cracks with the seasons. Thermal movement opens and closes joints. Genuine subsidence, the downward movement of the ground beneath your foundation, usually shows as diagonal cracks that are wider at the top, often near windows and doors, and that keep growing.</p>
<p>The only reliable way to know<strong> is a proper diagnosis</strong>: a structural engineer&#8217;s assessment, usually with trial holes to expose the foundations and soil, and frequently a drain survey. That investigation is not a formality. It tells you the cause, and the cause decides the cure.</p>
<h2>What are the causes of subsidence</h2>
<p>Property subsidence almost always traces back to one of a handful of causes, which are heavily influenced by the local ground conditions. Here are some of the main reasons why subsidence occurs:</p>
<ul>
<li><strong>Clay shrinkage.</strong> Clay <a href="https://www.bgs.ac.uk/geology-projects/shallow-geohazards/clay-shrink-swell/">shrinks in dry summers and swells in wet winters</a>. Shallow foundations sitting in that active zone move with it.</li>
<li><strong>Trees.</strong> Roots draw moisture from clay, drying and shrinking it. A thirsty tree in a hot summer sits behind a large share of subsidence claims.</li>
<li><strong>Leaking drains.</strong> Escaping water washes fine particles out of the soil, creating voids the foundation drops into.</li>
<li><strong>Made ground.</strong> Poorly compacted fill on former industrial or infill sites settles unevenly under load.</li>
<li><strong>Inadequate original foundations.</strong> Older properties often sit on shallow footings that were never designed for today&#8217;s conditions.</li>
</ul>
<p>&nbsp;</p>
<h2>The five underpinning options, compared</h2>
<div class="cost-compare">
<table>
<thead>
<tr>
<th>Method</th>
<th>How it works</th>
<th>Best suited to</th>
<th>Disruption</th>
<th>Relative cost</th>
</tr>
</thead>
<tbody>
<tr>
<td>Mass concrete</td>
<td data-label="How it works">Excavate in bays beneath the footing, fill with concrete</td>
<td data-label="Best suited to">Severe, deep subsidence and heavy loads on accessible sites</td>
<td data-label="Disruption">High: excavation, long timescales</td>
<td data-label="Relative cost">Labour-intensive, rises with depth</td>
</tr>
<tr>
<td>Beam and base</td>
<td data-label="How it works">A reinforced concrete beam spreads load onto concrete bases</td>
<td data-label="Best suited to">Uneven loads where continuous mass concrete is impractical</td>
<td data-label="Disruption">High to moderate</td>
<td data-label="Relative cost">Moderate to high</td>
</tr>
<tr>
<td>Mini-piled</td>
<td data-label="How it works">Small-diameter piles augered or driven to deep stable strata, tied with needle beams</td>
<td data-label="Best suited to">Deep competent strata, restricted access, high loads, made ground</td>
<td data-label="Disruption">Moderate: specialist rig, generates spoil</td>
<td data-label="Relative cost">Higher per pile</td>
</tr>
<tr>
<td>Resin injection</td>
<td data-label="How it works">Expanding structural resin compacts the soil and re-levels</td>
<td data-label="Best suited to">Shallow to moderate subsidence needing a quick, clean repair</td>
<td data-label="Disruption">Low: often completed in a day</td>
<td data-label="Relative cost">Lower, depends on extent</td>
</tr>
<tr>
<td>Screw pile</td>
<td data-label="How it works">Helical piles installed with low vibration, load transferred via brackets or needle beams</td>
<td data-label="Best suited to">Restricted access, near trees, made ground, low-vibration sites</td>
<td data-label="Disruption">Low to moderate: minimal spoil</td>
<td data-label="Relative cost">Mid-range</td>
</tr>
</tbody>
</table>
</div>
<h2><strong>Insurance, building control and resale</strong></h2>
<p>You will also need to think about some other factors to ensure you comply with building regulations and the property value isn’t harmed for any future resale.</p>
<p><strong>Insurance.</strong> Where subsidence is covered and a claim has been made, the insurer&#8217;s appointed engineer often specifies the method. Insurers increasingly accept resin injection and piled solutions as alternatives to traditional underpinning, provided the design is properly engineered and supervised.</p>
<p><strong>Building control.</strong> Underpinning is notifiable structural work. It requires<a href="https://www.planningportal.co.uk/applications/building-control-applications/building-control/approved-documents/part-a-structure/approved-document-a/"> building control approval</a> and sign-off, and that certification also protects you subsequently.</p>
<p><strong>Resale.</strong> An underpinned property must be disclosed on sale and can affect both insurability and mortgage lending<strong>. Proper engineering and complete certification</strong> are what reassure a prospective buyer and their lender, so retain every document.</p>
<h2><strong>Screw pile underpinning</strong></h2>
<p>For many properties, <a href="https://preformedsubstructures.co.uk/screw-pile-underpinning/">screw pile underpinning</a><strong> is the least disruptive method that still founds on stable ground</strong>. Installation is low-vibration and generates minimal spoil. The system suits <a href="https://preformedsubstructures.co.uk/restricted-access-foundations/">restricted-access</a> sites that a large rig cannot reach. Load is transferred through brackets or needle beams onto piles bearing in competent strata below the active clay, and the structure can often be returned to service quickly.</p>
<p>It is not universally applicable. Where movement is severe, loads are very high, or ground conditions genuinely require mass concrete, we will advise for an alternate underpinning method.</p>
<p><img decoding="async" class="alignnone size-full wp-image-3987" src="https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-scaled.avif" alt="screw pile underpinning" width="2560" height="1526" srcset="https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-200x119.avif 200w, https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-300x179.avif 300w, https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-400x238.avif 400w, https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-600x358.avif 600w, https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-768x458.avif 768w, https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-800x477.avif 800w, https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-1024x610.avif 1024w, https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-1200x715.avif 1200w, https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-1536x915.avif 1536w, https://preformedsubstructures.co.uk/wp-content/uploads/2026/06/IMG_5445res-scaled.avif 2560w" sizes="(max-width: 2560px) 100vw, 2560px" /></p>
<h2></h2>
<h2><strong>Require Underpinning? Recommended next steps</strong></h2>
<p>If you have been advised that you need underpinning:</p>
<ul>
<li>Obtain an independent structural engineer&#8217;s assessment before committing to any method.</li>
<li>Require the cause to be identified, not simply the movement measured.</li>
<li>If a drain is implicated, have it repaired and the movement monitored first.</li>
<li>Ask which methods suit your cause, access and loading, and why.</li>
<li>Retain every report and certificate for resale.</li>
</ul>
<p>Concerned about movement at your property in the South East of England and considering screw pile underpinning? <a href="https://preformedsubstructures.co.uk/contact-us/">Contact Preformed Substructures</a>. We will help establish the cause, and whether a low-disruption <a href="https://preformedsubstructures.co.uk/screw-pile-underpinning/">screw pile underpinning</a> solution is appropriate, before any excavation begins.</p>
<p>The post <a href="https://preformedsubstructures.co.uk/underpinning-options/">My Property Needs Underpinning: What Are the Options?</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Screw Piles vs Mini Piles vs Concrete Foundations: A Three-Way Comparison</title>
		<link>https://preformedsubstructures.co.uk/screw-piles-vs-mini-piles-vs-concrete-foundations/</link>
		
		<dc:creator><![CDATA[Chris Ward]]></dc:creator>
		<pubDate>Mon, 10 Aug 2026 08:03:27 +0000</pubDate>
				<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://preformedsubstructures.co.uk/?p=4020</guid>

					<description><![CDATA[<p>When it comes to foundations, the genuine choice is usually between three systems: traditional concrete, mini piles and screw piles. Each has conditions under which it is the correct specification, and conditions under which it is not.  The three systems defined Concrete strip or trench fill. A trench is excavated, concrete is placed, and the</p>
<p>The post <a href="https://preformedsubstructures.co.uk/screw-piles-vs-mini-piles-vs-concrete-foundations/">Screw Piles vs Mini Piles vs Concrete Foundations: A Three-Way Comparison</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p><span style="font-weight: 400;">When it comes to foundations, the genuine choice is usually between three systems: traditional concrete, mini piles and screw piles. Each has conditions under which it is the correct specification, and conditions under which it is not. </span></p>
<h2><b>The three systems defined</b></h2>
<p><b>Concrete strip or trench fill.</b><span style="font-weight: 400;"> A trench is excavated, concrete is placed, and the structure is built off it. Well understood, economical on competent shallow ground, and within the competence of any general builder.</span></p>
<p><b>Mini piles.</b><span style="font-weight: 400;"> Small-diameter piles, augered or driven, that transfer load to deep competent strata and carry high loads. Specified where suitable bearing ground lies well below the surface.</span></p>
<p><b>Screw piles.</b><span style="font-weight: 400;"> Helical steel piles installed with a low-vibration rig, bearing on competent strata and capable of being loaded almost immediately. Rapid to install, low-spoil, and removable.</span></p>
<p><span style="font-weight: 400;">Whichever system suits your site, the foundation must satisfy</span><a href="https://www.planningportal.co.uk/applications/building-control-applications/building-control/approved-documents/part-a-structure/approved-document-a/"> <span style="font-weight: 400;">Approved Document A</span></a><span style="font-weight: 400;">, which covers structural loading and ground movement, and any piled design should follow</span><a href="https://www.fps.org.uk/position-papers/design-of-piles-to-eurocodes/"> <span style="font-weight: 400;">Federation of Piling Specialists guidance on design to Eurocode 7</span></a><span style="font-weight: 400;">. </span></p>
<h2><b>Comparison of key criteria</b></h2>
<div class="cost-compare">
<table>
<thead>
<tr>
<th>Criterion</th>
<th>Concrete strip/trench</th>
<th>Mini piles</th>
<th>Screw piles</th>
</tr>
</thead>
<tbody>
<tr>
<td>Typical use</td>
<td data-label="Concrete strip/trench">Shallow foundations on good ground</td>
<td data-label="Mini piles">Deep strata, high loads</td>
<td data-label="Screw piles">Extensions, new builds, restricted sites</td>
</tr>
<tr>
<td>Programme</td>
<td data-label="Concrete strip/trench">Slow: excavate, pour, cure</td>
<td data-label="Mini piles">Moderate</td>
<td data-label="Screw piles">Fast: often installed in hours</td>
</tr>
<tr>
<td>Access and headroom</td>
<td data-label="Concrete strip/trench">Needs open excavation</td>
<td data-label="Mini piles">Compact rigs available</td>
<td data-label="Screw piles">Compact rigs available</td>
</tr>
<tr>
<td>Load capacity</td>
<td data-label="Concrete strip/trench">Fine for typical low-rise</td>
<td data-label="Mini piles">Very high</td>
<td data-label="Screw piles">High, with a practical ceiling</td>
</tr>
<tr>
<td>Ground suitability</td>
<td data-label="Concrete strip/trench">Poor on soft, deep or made ground</td>
<td data-label="Mini piles">Good, including deep strata</td>
<td data-label="Screw piles">Good, including made ground and near trees</td>
</tr>
<tr>
<td>Spoil and disposal</td>
<td data-label="Concrete strip/trench">Excavated soil to remove</td>
<td data-label="Mini piles">Auger arisings, costly if contaminated</td>
<td data-label="Screw piles">Minimal</td>
</tr>
<tr>
<td>Vibration and noise</td>
<td data-label="Concrete strip/trench">Low</td>
<td data-label="Mini piles">Higher if driven</td>
<td data-label="Screw piles">Low</td>
</tr>
<tr>
<td>Reversibility</td>
<td data-label="Concrete strip/trench">Permanent</td>
<td data-label="Mini piles">Permanent</td>
<td data-label="Screw piles">Removable</td>
</tr>
<tr>
<td>Verification</td>
<td data-label="Concrete strip/trench">Visual inspection</td>
<td data-label="Mini piles">Set or load testing</td>
<td data-label="Screw piles">Torque logged at install</td>
</tr>
</tbody>
</table>
</div>
<p>&nbsp;</p>
<h2><b>Cost drivers beyond the unit rate</b></h2>
<p><span style="font-weight: 400;">The unit rate is the figure most often quoted and will usually favour concrete as the most cost effective method, however this rarely determines the true cost of the works. Three cost drivers sit outside that rate and materially affect the total.</span></p>
<p><b>Programme.</b><span style="font-weight: 400;"> Concrete occupies the site through excavation, placement and curing, frequently a week or more before construction can proceed above it. Screw piles are often installed and loaded within a day. On a constrained programme, the days saved translate directly into reduced labour and preliminaries.</span></p>
<p><b>Spoil and reinstatement.</b><span style="font-weight: 400;"> Both excavation and augering generate arisings requiring removal. On contaminated or made ground, that material is charged for disposal by the tonne as controlled waste. Screw piles displace rather than excavate, minimising both removal and subsequent reinstatement.</span></p>
<p><b>Access and plant.</b><span style="font-weight: 400;"> A restricted or awkward site can preclude the plant a given method requires, or necessitate a smaller, slower rig. The cost of mobilising and demobilising plant should be accounted for, not only the operating rate.</span></p>
<p><span style="font-weight: 400;">The valid comparison is between finished, cleared, load-ready foundations, not between raw material rates. That is where the difference between the three systems becomes apparent.</span></p>
<p>&nbsp;</p>
<p><img decoding="async" class="alignnone size-full wp-image-3506" src="https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2.jpg" alt="large pile install" width="2000" height="1597" srcset="https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-177x142.jpg 177w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-200x160.jpg 200w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-300x240.jpg 300w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-400x319.jpg 400w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-600x479.jpg 600w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-768x613.jpg 768w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-800x639.jpg 800w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1024x818.jpg 1024w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1200x958.jpg 1200w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1536x1226.jpg 1536w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2.jpg 2000w" sizes="(max-width: 2000px) 100vw, 2000px" /></p>
<h2></h2>
<h2><b>Where concrete is appropriate</b></h2>
<p><span style="font-weight: 400;">For a straightforward single-storey extension on competent shallow ground, with open access and no programme constraint, concrete is difficult to better on cost. It is well proven, requires no specialist plant, and is familiar to every builder. Its limitations emerge where the ground is soft, deep, made or affected by vegetation, or where the excavation and curing period cannot be accommodated. See our </span><a href="https://preformedsubstructures.co.uk/screw-pile-foundations-vs-concrete-foundations-cost/"><span style="font-weight: 400;">screw piling vs concrete foundation</span></a><span style="font-weight: 400;"> cost comparison post for more information.</span></p>
<h2><b>Where mini piles are appropriate</b></h2>
<p><span style="font-weight: 400;">Where the competent stratum is deep, loads are very high, or the capacity of a bored or driven pile is required, mini piles are the appropriate specification. The principal trade-off is spoil. </span></p>
<p><span style="font-weight: 400;">Augered mini piles bring arisings to the surface, and on contaminated or</span> <span style="font-weight: 400;">made ground that material carries a real disposal cost. Driven variants introduce vibration, a material consideration adjacent to sensitive or shared structures.</span></p>
<h2><b>Where screw piles are appropriate</b></h2>
<p><span style="font-weight: 400;">Screw piles are best suited to <a href="https://preformedsubstructures.co.uk/restricted-access-foundations/">restricted</a>, awkward and vibration-sensitive sites. They install within hours rather than days, with minimal spoil, low vibration and no curing period, allowing near-immediate loading. They perform in made ground and in clay adjacent to vegetation including in <a href="https://preformedsubstructures.co.uk/root-protection-screw-pile-foundations/">root protection zones</a>. Because they are wound in rather than cast, they can be extracted and the ground reinstated at end of life. Installation torque is logged throughout, providing a continuous indication of capacity.</span></p>
<p><span style="font-weight: 400;">They are not without limits. For exceptionally high loads, or where bedrock lies close to the surface with insufficient soil to provide lateral support, an alternative system may be preferable. We would rather state that plainly than oversell the system.</span></p>
<h2><b>Is a Screw Piling Foundation the Right Fit for your Project?</b></h2>
<p><span style="font-weight: 400;">To summarise, here are five questions that means screw piling could be the best fit for your prkect</span></p>
<ul>
<li style="font-weight: 400;" aria-level="1"><b>How deep is competent ground?</b><span style="font-weight: 400;"> Depth favours piling over concrete.</span></li>
<li style="font-weight: 400;" aria-level="1"><b>What is the loading?</b><span style="font-weight: 400;"> Very high loads favour mini piles.</span></li>
<li style="font-weight: 400;" aria-level="1"><b>What is the access?</b><span style="font-weight: 400;"> Restricted access favours screw or mini piles on compact rigs.</span></li>
<li style="font-weight: 400;" aria-level="1"><b>Is the ground made or contaminated?</b><span style="font-weight: 400;"> Spoil and disposal favour screw piles.</span></li>
<li style="font-weight: 400;" aria-level="1"><b>Are vibration or programme critical?</b><span style="font-weight: 400;"> Both favour screw piles.</span></li>
</ul>
<p><span style="font-weight: 400;">For a <a href="https://preformedsubstructures.co.uk/">screw pile foundation</a> specification suited to your site, </span><a href="https://preformedsubstructures.co.uk/contact-us/"><span style="font-weight: 400;">contact Preformed Substructures</span></a><span style="font-weight: 400;"> . We will assess your ground, loading and access, and advise honestly which of the three systems is appropriate, including where it is not ours.</span></p>
<p>The post <a href="https://preformedsubstructures.co.uk/screw-piles-vs-mini-piles-vs-concrete-foundations/">Screw Piles vs Mini Piles vs Concrete Foundations: A Three-Way Comparison</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>What Happens to Screw Piles If the Ground Moves?</title>
		<link>https://preformedsubstructures.co.uk/what-happens-screw-piles-ground-moves/</link>
		
		<dc:creator><![CDATA[Chris Ward]]></dc:creator>
		<pubDate>Tue, 23 Jun 2026 09:29:54 +0000</pubDate>
				<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://preformedsubstructures.co.uk/?p=3983</guid>

					<description><![CDATA[<p>If you have watched a crack creep up a wall, felt a door start to stick, or read one too many headlines about subsidence in a dry summer, the question almost asks itself. You are weighing up screw piles for an extension or a new build, and one worry keeps surfacing: what happens to them</p>
<p>The post <a href="https://preformedsubstructures.co.uk/what-happens-screw-piles-ground-moves/">What Happens to Screw Piles If the Ground Moves?</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p><span style="font-weight: 400;">If you have watched a crack creep up a wall, felt a door start to stick, or read one too many headlines about subsidence in a dry summer, the question almost asks itself. You are weighing up screw piles for an extension or a new build, and one worry keeps surfacing: what happens to them if my ground moves?</span></p>
<p><span style="font-weight: 400;">It is a fair question, and it deserves a straight answer rather than a sales pitch. Here is the honest version. Across most of the South East, <strong>the ground will move</strong>. Shrink-swell clay does it every year. The job of a foundation is not to stop the ground moving. It is to keep your building still while it does.</span></p>
<p><i><span style="font-weight: 400;">The ground will move. A correctly designed screw pile foundation does not have to move with it.</span></i></p>
<p>&nbsp;</p>
<h2><span style="font-weight: 400;">First, separate two kinds of movement</span></h2>
<p><span style="font-weight: 400;">When clay gains or loses moisture, two things can happen. In a wet winter it swells and the ground lifts, which engineers call heave. In a dry summer it shrinks and the ground drops, which is the settlement most people recognise as subsidence. Both will move a shallow foundation, and both can do it unevenly across a single building.</span></p>
<p><span style="font-weight: 400;">That last word is the one that matters. Uniform movement is rarely the problem. </span><b>Differential movement, where one part of the structure shifts relative to another</b><span style="font-weight: 400;">, is what actually cracks walls and racks door frames.</span></p>
<p>&nbsp;</p>
<h2><span style="font-weight: 400;">Why traditional footings ride the seasonal movement</span></h2>
<p><span style="font-weight: 400;">Most strip and trench-fill foundations sit within, or only just below, what is known as the active zone. This is the upper layer of soil that responds to the seasons, drying and swelling as the weather changes. In </span><a href="https://webapps.bgs.ac.uk/lexicon/lexicon.cfm?pub=LC"><span style="font-weight: 400;">London Clay</span></a><span style="font-weight: 400;"> and the other shrinkable clays common across the South East, that zone is typically the upper metre or two, and it reaches deeper still where mature trees are drawing moisture out of the ground.</span></p>
<p><span style="font-weight: 400;">A footing planted in that zone is, in effect, tied to the weather. When the clay shrinks back in a drought, the footing has nothing stable beneath it and the ground gives way. This is why <a href="https://www.newbuildinspections.com/wp-content/uploads/2024/07/NHBC-Standards-2024-4-2-Building-Near-Trees.pdf">NHBC guidance on building near trees in shrinkable soils</a> exists, and why so many subsidence claims trace back to a thirsty tree and a hot summer.</span></p>
<p>&nbsp;</p>
<h2><span style="font-weight: 400;">How screw piles work with variable ground movement</span></h2>
<p><span style="font-weight: 400;">A <a href="https://preformedsubstructures.co.uk/">screw pile foundation</a> is designed to do the opposite. Rather than rest in the seasonal zone, its load-bearing helix is driven down into competent strata that does not change with the weather. Reach ground that stays put, and the foundation stays put with it.</span></p>
<p><span style="font-weight: 400;">There is a structural bonus to going deeper, too. Research into</span><a href="https://www.sciencedirect.com/science/article/pii/S003808061600010X"> <span style="font-weight: 400;">axially loaded screw pile design</span></a><span style="font-weight: 400;"> is consistent on one point: the further the helix sits below the surface relative to its size, the higher the capacity it develops, in both clay and granular soils. </span></p>
<p><span style="font-weight: 400;">So driving the helix well below the active zone does two jobs at once. It clears the moving ground, and it builds a stronger foundation in the process. In granular soils, the helix also end-bears directly on firm strata, which is a large part of why a screw pile resists downward load so reliably.</span></p>
<p><img decoding="async" class="alignnone size-full wp-image-1523" src="https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n.jpg" alt="screw pile foundations" width="2048" height="1360" srcset="https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n-200x133.jpg 200w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n-300x199.jpg 300w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n-400x266.jpg 400w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n-600x398.jpg 600w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n-768x510.jpg 768w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n-800x531.jpg 800w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n-1024x680.jpg 1024w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n-1200x797.jpg 1200w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n-1536x1020.jpg 1536w, https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/164995530_104610421725620_1414564869174780431_n.jpg 2048w" sizes="(max-width: 2048px) 100vw, 2048px" /></p>
<p>&nbsp;</p>
<h2><span style="font-weight: 400;">What installation torque does, and doesn&#8217;t, tell you</span></h2>
<p><span style="font-weight: 400;">One of the genuine advantages of screw piling is feedback. As the pile turns into the ground, the installation rig reads the torque, which gives a live measure of how hard the ground is fighting back. Torque correlates with capacity, so it is a real, useful check that the ground is behaving as the design assumed.</span></p>
<p><span style="font-weight: 400;">It is worth being precise about its limits, though, because some of the industry oversells it. The research is clear that installation torque most closely reflects the soil conditions a pile would meet under uplift. Under compression, the downward load is carried by undisturbed soil below the lowest helix, which the torque reading does not directly capture. In short, torque confirms what the design predicted. It does not replace the design.</span></p>
<p>&nbsp;</p>
<h2><span style="font-weight: 400;">How ground beams share the load</span></h2>
<p><span style="font-weight: 400;">A single pile resists movement at a single point. A foundation, though, is a system, and this is where differential settlement is actually defeated.</span></p>
<p><span style="font-weight: 400;">The pile heads are tied together by a reinforced concrete ground beam, which spreads the structure&#8217;s load across every pile and locks them into one rigid platform. Even if conditions vary slightly from one pile to the next, the beam shares the load and resists the uneven movement that cracks buildings. The piles reach stable ground. The beam makes them work as one.</span></p>
<p>&nbsp;</p>
<h2><span style="font-weight: 400;">What this means for your  screw pile foundation project</span></h2>
<p><span style="font-weight: 400;">If you take one thing from this, make it a short checklist to run past whoever is designing your foundation:</span></p>
<ul>
<li style="font-weight: 400;" aria-level="1"><b>Commission a ground investigation.</b><span style="font-weight: 400;"> It establishes your soil type and how deep the seasonal active zone runs, especially if there are trees nearby.</span></li>
<li style="font-weight: 400;" aria-level="1"><b>Check the helix sits below the active zone.</b><span style="font-weight: 400;"> Ask your structural engineer to confirm the design embedment relative to that zone, not just a standard depth.</span></li>
<li style="font-weight: 400;" aria-level="1"><b>Ask to see the installation torque records.</b><span style="font-weight: 400;"> They are your evidence that the ground matched the design on the day.</span></li>
<li style="font-weight: 400;" aria-level="1"><b>Confirm a ground beam is designed for your loads.</b><span style="font-weight: 400;"> This is what holds the piles together and resists differential movement.</span></li>
<li style="font-weight: 400;" aria-level="1"><b>If your property is already moving,</b><span style="font-weight: 400;"> screw piles are also a low-disruption way to stabilise it through </span><a href="https://preformedsubstructures.co.uk/screw-pile-underpinning/"><span style="font-weight: 400;">underpinning</span></a><span style="font-weight: 400;">.</span></li>
</ul>
<p>&nbsp;</p>
<h2><b>Screw Piles Are a Reliable Option for Unpredictable Ground Conditions</b></h2>
<p><span style="font-weight: 400;">So, what happens to screw piles if the ground moves? In a foundation designed and installed correctly, the answer is reassuringly dull: very little. The seasonal movement plays out in the upper soil, while your foundation bears quietly on stable ground below it, tied together and indifferent to the weather above.</span></p>
<p><span style="font-weight: 400;">That dull, dependable outcome is not luck. It comes from a proper ground investigation, an engineered design, and verified installation. Get those three right and the moving ground stops being your problem.</span></p>
<p><span style="font-weight: 400;">If you are planning a project on clay, </span><a href="https://preformedsubstructures.co.uk/root-protection-screw-pile-foundations/"><span style="font-weight: 400;">near trees</span></a><span style="font-weight: 400;">, or anywhere movement is a concern, </span><a href="https://preformedsubstructures.co.uk/contact-us/"><span style="font-weight: 400;">get in touch</span></a><span style="font-weight: 400;"> with Preformed Substructures. We will talk you through a foundation design built to stay still. </span></p>
<p>&nbsp;</p>
<p>The post <a href="https://preformedsubstructures.co.uk/what-happens-screw-piles-ground-moves/">What Happens to Screw Piles If the Ground Moves?</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Can You Build a Two-Storey Extension on Screw Piles?</title>
		<link>https://preformedsubstructures.co.uk/two-storey-extension-screw-piles/</link>
		
		<dc:creator><![CDATA[Chris Ward]]></dc:creator>
		<pubDate>Wed, 20 May 2026 09:33:02 +0000</pubDate>
				<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://preformedsubstructures.co.uk/?p=3960</guid>

					<description><![CDATA[<p>Screw piles have an image problem. Ask most people what they're used for and you'll hear garden rooms, decking, lightweight timber frames. The perception is that helical pile foundations are fine for small structures but not up to the demands of serious masonry construction, and certainly not a two-storey brick and block extension. That perception</p>
<p>The post <a href="https://preformedsubstructures.co.uk/two-storey-extension-screw-piles/">Can You Build a Two-Storey Extension on Screw Piles?</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>Screw piles have an image problem. Ask most people what they&#8217;re used for and you&#8217;ll hear garden rooms, decking, lightweight timber frames. The perception is that helical pile foundations are fine for small structures but not up to the demands of serious masonry construction, and certainly not a two-storey brick and block extension.</p>
<p>That perception is wrong and usually based on a confusion with <em>ground screws</em> and it&#8217;s costing homeowners on projects where screw piles would perform just as well.</p>
<p>&nbsp;</p>
<h2>Where the Assumption Comes From</h2>
<p>The confusion is understandable. Screw piles are associated with speed and low disruption. In construction, those qualities often get conflated with lightness or compromise. Many people also confuse screw/helical piles with ground screws 0 a smaller, lighter load fastening usually used for sheds/decking.</p>
<p>The reality is that load capacity is a function of pile design, not installation method. A two-storey extension screw pile foundation is engineered to a specific working load before a single pile goes in the ground. Diameter, shaft length, helix plates, and depth are all calculated by a structural engineer based on what the structure needs to carry. The installation process then verifies that capacity through torque monitoring on every pile.</p>
<p>&nbsp;</p>
<h2>What a Two-Storey Extension Actually Weighs</h2>
<p>This is where the numbers matter. A typical single-storey rear extension in brick and block might impose a load of 30 to 50 kN per pile position, depending on span and wall thickness. Add a second storey: masonry walls, floor joists, ceiling, roof structure, and that figure can rise to 80 to 150 kN per pile position. On longer spans or beneath loadbearing walls, it can go higher.</p>
<p>The GoliathTech system installed by Preformed Substructures is rated to working loads of up to 300 kN per pile. That exceeds what most two-storey domestic extensions demand at any single pile position.</p>
<p>&nbsp;</p>
<h2>How the Screw Pile Foundation Design Changes for Two Storeys</h2>
<p>The pile spec for a two-storey extension screw pile foundation differs from a single-storey. The structural engineer will typically:</p>
<p><strong>Increase pile diameter where needed.</strong> Larger shafts carry higher compression loads, particularly beneath loadbearing walls or point loads from steel beams.</p>
<p><strong>Add helix plates.</strong> More plates increase the bearing area and raise the working load per pile without needing extra depth.</p>
<p><strong>Tighten pile spacing.</strong> A closer grid spreads the load more evenly and reduces the span the ground beam has to bridge.</p>
<p><strong>Upsize the ground beam.</strong> The beams spanning between pile heads must be designed for the loads from two storeys above. This is standard structural design. The beams are sized to suit.</p>
<p>&nbsp;</p>
<p><img decoding="async" class="alignnone size-full wp-image-1510" src="https://preformedsubstructures.co.uk/wp-content/uploads/2024/05/276a-scaled-e1779269915408.jpg" alt="" width="1024" height="768" /></p>
<p>&nbsp;</p>
<h2>What the Structural Engineer Needs</h2>
<p>The engineer needs:</p>
<p><strong>Full architectural drawings.</strong> Floor plans, elevations, and a section showing wall build-up, floor construction, and roof structure. Without these, loads cannot be calculated.</p>
<p><strong>Ground information.</strong> A ground investigation report, or at least trial pit data. Depth and pile diameter cannot be fixed without knowing what is beneath the surface. This applies on London Clay sites, chalk, made ground, and most other conditions across South East England.</p>
<p><strong>Construction details.</strong> The loads depend on whether you are building in traditional masonry, timber frame, or a hybrid system. Each imposes different forces on the foundation.</p>
<p>Once the engineer has these inputs, they produce a pile layout drawing: positions, diameters, target depths, and ground beam sizes.</p>
<p>&nbsp;</p>
<h2>Restricted Access: A Major Advantage of Screw Piling</h2>
<p>Most homeowners choose screw piles for single-storey extensions partly because of access. Concrete foundations need excavators, trucks, and pump hire: none of which fit through a standard side gate.</p>
<p>For a two-storey extension the foundation load increases. The access problem does not. The piles still go in through an 800mm gap. The equipment is the same. Installation still takes one to three days.</p>
<p>That matters because two-storey extensions are often planned on exactly the properties where access is tightest: terraced houses, urban infill plots, homes in London, Surrey, and Kent where a side gate is the only way to the rear garden. Screw piles remain the only piled foundation that works on those sites without road closures or heavy logistics.</p>
<p>&nbsp;</p>
<h2>What Screw Piles Cannot Do</h2>
<p>There are two-storey projects where screw piles are not the right call.</p>
<p><strong>Very high point loads.</strong> Where a steel frame puts very large loads at individual column bases, a larger or deeper pile may not be practical for the site. This is rare on domestic extensions but can occur on commercial projects.</p>
<p><strong>No competent bearing stratum at a workable depth.</strong> If ground investigation shows stable strata at 8m or more, the economics shift. This is uncommon across most of SE England in the UK, but can occur on sites with deep-made ground or complex geology.</p>
<p><strong>Unknown existing foundations.</strong> Where the extension adjoins a building with unknown foundations, the interaction between old and new structure needs careful engineering regardless of the foundation system chosen.</p>
<p>&nbsp;</p>
<h2>Planning a Two-Storey Extension in the South East of England? Get a Free Quote</h2>
<p>No excavation, no concrete, no 28-day curing period. Installation takes one to three days and the foundation is ready to build off the morning the team leaves. For most two-storey extension screw pile foundation projects in London and the South East, that is the proposition.</p>
<p>The GoliathTech system is NHBC accepted and ISO9001 compliant. Preformed Substructures has over 18 years of specialist groundworks experience and covers London, Surrey, Kent, Hertfordshire, East Sussex, and West Sussex.</p>
<p>If you&#8217;re planning a two-storey extension and have been told, or assumed, that screw piles are not suitable, get in touch. We&#8217;ll tell you whether they&#8217;re right for your site before you commit to anything.</p>
<p>The post <a href="https://preformedsubstructures.co.uk/two-storey-extension-screw-piles/">Can You Build a Two-Storey Extension on Screw Piles?</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Screw Pile Foundations vs Concrete Strip Foundations: How Much Do They Cost?</title>
		<link>https://preformedsubstructures.co.uk/screw-pile-foundations-vs-concrete-foundations-cost/</link>
		
		<dc:creator><![CDATA[Chris Ward]]></dc:creator>
		<pubDate>Wed, 20 May 2026 09:12:11 +0000</pubDate>
				<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://preformedsubstructures.co.uk/?p=3938</guid>

					<description><![CDATA[<p>Most people compare the wrong numbers. Here's what a genuine cost comparison of screw piles vs. concrete strip foundations actually looks like. Ask a builder to quote for foundations and you'll almost certainly get a concrete strip price back first. It's the default. It's what groundworkers know, what estimators price in their sleep, and what</p>
<p>The post <a href="https://preformedsubstructures.co.uk/screw-pile-foundations-vs-concrete-foundations-cost/">Screw Pile Foundations vs Concrete Strip Foundations: How Much Do They Cost?</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p><b><i>Most people compare the wrong numbers. Here&#8217;s what a genuine cost comparison of screw piles vs. concrete strip foundations actually looks like.</i></b></p>
<p><span style="font-weight: 400;">Ask a builder to quote for foundations and you&#8217;ll almost certainly get a concrete strip price back first. It&#8217;s the default. It&#8217;s what groundworkers know, what estimators price in their sleep, and what most structural engineers draw without a second thought.</span></p>
<p><span style="font-weight: 400;">So how much do <a href="https://preformedsubstructures.co.uk/">screw pile foundations</a> cost compared to concrete? Less straightforwardly than most quotes suggest. When people look at screw pile foundations cost vs concrete, they typically compare headline figures that don’t include the same scope.</span></p>
<p><span style="font-weight: 400;">This matters. On many projects across London and the South East, screw piles, also known as helical piles, are faster, less disruptive, and more cost-effective overall. </span></p>
<p><span style="font-weight: 400;"> </span></p>
<h2><span style="font-weight: 400;">Why Direct Price Comparisons of Screw Pile vs. Traditional Concrete Foundations Don&#8217;t Work</span></h2>
<p><span style="font-weight: 400;">The instinct is to compare like for like. What does a concrete strip foundation cost versus screw piles for the same extension?</span></p>
<p><span style="font-weight: 400;">The problem with a direct comparison is they&#8217;re different systems with different costs, different timelines, and different knock-on effects across the rest of your project.</span></p>
<p><span style="font-weight: 400;">A concrete strip quote typically covers excavation, concrete, reinforcement, and backfill. It rarely includes skip hire and spoil disposal, concrete pump hire on tight sites, the 28-day curing period sitting idle in your programme, or extra groundwork if conditions are worse than expected once digging starts.</span></p>
<p><span style="font-weight: 400;">A screw pile quote covers the full pile design, supply, installation, and preformed concrete ground beams, ready for your builder to start the next day. </span></p>
<p><span style="font-weight: 400;"> </span></p>
<h2><span style="font-weight: 400;">The Real Screw Pile vs Concrete Strip Foundation Price Comparison: A Typical SE England Rear Extension</span></h2>
<p><span style="font-weight: 400;">The figures below are based on a single-storey rear extension, perimeter of around 16 linear metres, on London Clay, with access via a side gate. </span></p>
<p><span style="font-weight: 400;">All figures are indicative 2026 market rates. Every project is different.</span></p>
<div class="cost-compare">
<table>
<thead>
<tr>
<th>Cost item</th>
<th>Concrete strip</th>
<th>Screw pile</th>
</tr>
</thead>
<tbody>
<tr>
<td>Foundation design / structural engineer fees</td>
<td data-label="Concrete strip">£800 to £1,200</td>
<td data-label="Screw pile">£800 to £1,200</td>
</tr>
<tr>
<td>Excavation and labour</td>
<td data-label="Concrete strip">£1,500 to £2,500</td>
<td data-label="Screw pile">Included in installation</td>
</tr>
<tr>
<td>Concrete supply</td>
<td data-label="Concrete strip">£1,800 to £2,800</td>
<td data-label="Screw pile"><span class="na">Not applicable</span></td>
</tr>
<tr>
<td>Spoil removal / skip hire</td>
<td data-label="Concrete strip">£600 to £1,200</td>
<td data-label="Screw pile"><span class="na">Not applicable</span></td>
</tr>
<tr>
<td>Concrete pump hire (restricted access)</td>
<td data-label="Concrete strip">£400 to £700</td>
<td data-label="Screw pile"><span class="na">Not applicable</span></td>
</tr>
<tr>
<td>Piles, ground beams, installation</td>
<td data-label="Concrete strip"><span class="na">Not applicable</span></td>
<td data-label="Screw pile">£5,000 to £9,000</td>
</tr>
<tr>
<td>Programme delay (4 weeks at typical prelims)</td>
<td data-label="Concrete strip">£1,500 to £3,000+</td>
<td data-label="Screw pile">None</td>
</tr>
</tbody>
<tfoot>
<tr>
<td>Indicative total</td>
<td data-label="Concrete strip">£6,600 to £11,400</td>
<td data-label="Screw pile">£5,800 to £10,200</td>
</tr>
</tfoot>
</table>
</div>
<p>&nbsp;</p>
<p><b><i>A few things to note.</i></b><span style="font-weight: 400;"> The programme delay line is the most variable: it depends on your contractor’s prelims and whether a four-week wait has real knock-on costs for your project. The concrete figures also assume restricted access &#8211; on an open site costs can come in lower.</span></p>
<p><span style="font-weight: 400;"> </span></p>
<h2><span style="font-weight: 400;">What Affects the Final Price of a Piled Foundation the Most</span></h2>
<p><span style="font-weight: 400;">Not all screw pile jobs cost the same, and not all concrete jobs do either. These are the variables that move the needle most, roughly in order of impact.</span></p>
<p><b>Ground conditions.</b><span style="font-weight: 400;"> This is the biggest single factor for both systems. London Clay requires deeper piles to get below the active zone. Made ground needs a Ground Inspection to establish what&#8217;s underneath. Chalk can be variable near the surface. Poor or unpredictable ground adds cost to both systems, but the risk lands differently. With concrete, bad ground can mean a redesign mid-dig. With screw piles, the pile goes deeper until it hits the required torque. You pay for extra depth, not a redesign.</span></p>
<p><b>Depth.</b><span style="font-weight: 400;"> Helical pile depth drives cost directly. A 2m pile costs less than a 4m pile. Depth is determined by ground conditions and the required load, so it can&#8217;t be fixed until the ground is understood. Any quote given before a ground investigation is an estimate, not a price.</span></p>
<p><b>Number of piles.</b><span style="font-weight: 400;"> A small single-storey extension might need 6 piles. A larger L-shaped or two-storey structure could need 14 or more. The structural engineer&#8217;s layout drawing determines this, which is one of the main reasons costs vary between projects of similar footprint.</span></p>
<p><b>Access.</b><span style="font-weight: 400;"><a href="https://preformedsubstructures.co.uk/restricted-access-foundations/"> Restricted access</a> adds significant cost to concrete: pump hire, manual labour, logistics. For screw piles the impact is smaller. </span></p>
<p><b>Pile diameter.</b><span style="font-weight: 400;"> Larger diameter piles carry higher loads but cost more per pile. The structural engineer specifies the required diameter based on load at each pile position. For most domestic extensions, standard diameters are sufficient.</span></p>
<p><img decoding="async" class="alignnone wp-image-3506 size-large" src="https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1024x818.jpg" alt="large pile install" width="1024" height="818" srcset="https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-177x142.jpg 177w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-200x160.jpg 200w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-300x240.jpg 300w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-400x319.jpg 400w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-600x479.jpg 600w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-768x613.jpg 768w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-800x639.jpg 800w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1024x818.jpg 1024w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1200x958.jpg 1200w, https://preformedsubstructures.co.uk/wp-content/uploads/2025/11/Large-pile-install2-1536x1226.jpg 1536w" sizes="(max-width: 1024px) 100vw, 1024px" /></p>
<p><span style="font-weight: 400;"> </span></p>
<h2><span style="font-weight: 400;">Does a Ground Investigation Add Cost or Save It?</span></h2>
<p><span style="font-weight: 400;">A ground investigation (GI) is one of those line items that gets cut from budgets and then regretted on site. Here&#8217;s the honest picture.</span></p>
<p><span style="font-weight: 400;">A basic GI for a domestic extension typically costs between £500 and £2,000, depending on the number of trial pits or boreholes, the tests required, and the site location. It feels like an extra cost at the outset. In practice, it almost always pays for itself.</span></p>
<p><span style="font-weight: 400;">Without ground information, a pile contractor is designing blind. Depths get estimated conservatively, which means you&#8217;re likely quoted for more pile than you need. If conditions are worse than assumed, there&#8217;s a risk of additional cost on site when the pile needs to go deeper than designed. If conditions are better, you&#8217;ve overpaid.</span></p>
<p><span style="font-weight: 400;">A GI gives the structural engineer what they need to design the pile correctly: depth, diameter, helix configuration, and ground beam specification. The quote you receive based on that design is accurate, not padded with contingency.</span></p>
<p><span style="font-weight: 400;">There’s a compliance angle too. Your structural engineer will often require ground data before signing off a foundation design, and Building Control may ask for it as part of the approval process. </span></p>
<p><span style="font-weight: 400;">For sites with a complex history &#8211; made ground, previous demolition, proximity to old drainage or buried structures &#8211; a GI is the difference between a project that runs smoothly and one that stops on day one when the pile hits something unexpected.</span></p>
<p><span style="font-weight: 400;"> </span></p>
<h2><span style="font-weight: 400;">Where Screw Piles Cost More </span></h2>
<p><span style="font-weight: 400;">There are cases where concrete strip foundations are the better value choice vs. helical pile foundations.</span></p>
<p><b>Good ground, easy access.</b><span style="font-weight: 400;"> Where bearing strata are close to the surface, ground is consistent, and there&#8217;s no programme pressure, strip foundations can be cheaper on a straight cost basis.</span></p>
<p><b>Very high loads.</b><span style="font-weight: 400;"> Large commercial structures with heavy loads need bigger, deeper piles. At that scale, the cost per pile rises and the programme saving narrows.</span></p>
<p><b>Sites with buried obstructions.</b><span style="font-weight: 400;"> Old concrete, flint beds, or buried services can slow or stop screw pile installation. On urban sites with an uncertain below-ground history, this risk needs pricing in.</span></p>
<p><span style="font-weight: 400;"> </span></p>
<h2><span style="font-weight: 400;">Want a Quote on a Screw Pile Foundation? Get in Touch</span></h2>
<p><span style="font-weight: 400;">The only way to compare foundation costs fairly is to price both systems on equal terms considering all the factors that influence your project.</span></p>
<p><span style="font-weight: 400;">Preformed Substructures offers free, no-obligation quotes across London, Surrey, Kent, Hertfordshire, East Sussex, and West Sussex. We’re one of the South East’s <a href="https://preformedsubstructures.co.uk/">specialist screw pile foundation contractors</a>. Get in touch with your plans and ground conditions and we’ll give you an accurate figure based on the actual design.</span></p>
<p><span style="font-weight: 400;"> </span></p>
<p>&nbsp;</p>
<p>The post <a href="https://preformedsubstructures.co.uk/screw-pile-foundations-vs-concrete-foundations-cost/">Screw Pile Foundations vs Concrete Strip Foundations: How Much Do They Cost?</a> appeared first on <a href="https://preformedsubstructures.co.uk">Preformed Substructures</a>.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
